|
1.0 PMI Model
No. PEC-40-25-0R518-20-12-SFF-TTLVG, 0.5 to 18.0 GHz, Dual
Gain Low Noise Amplifier
PMI Model No.
PEC-40-25-0R518-20-12-SFF-TTLVG is a Dual Gain Low Noise
Amplifier that operates over the 0.5 to 18.0 GHz frequency range.
It has a maximum input power of +20 dBm CW and a maximum VSWR of
2.0:1. This model is outfitted with SMA female connectors in a
housing measuring 2.540" x 1.000" x 0.383".
· Frequency Range: 0.5 to 18.0 GHz
· Gain @ +25°C:
· Max Gain Position: +38 dB ± 4 dB Max. - Measured +40.1 dB
· Min Gain Position: +23 dB ± 4 dB Max. - Measured +24.7 dB
· Pout @ 1 dB Compression @ +25°C:
· Max Gain Position: +19 dB Min.
· Min Gain Position: +17 dB Min.
· Saturated Output Power (Both Gains) Over Operating
Temp Range: +25 dBm Typ.
· Noise @ +25°C:
· Max Gain Position: +5.0 dB Max. (Above 1.0 GHz) - Measured +4.4 dB
· Min Gain Position: +7.5 dB Max. (Above 1.0 GHz) - Measured +4.5 dB
· VSWR In/Out: 2.0:1 Max. - Measured 1.51:1/1.92:1
· Input/Output Impedance: 50 Ohms Nominal
· Input Power (Without Damage): +20 dBm CW Max.
· In-Band Harmonics @ or Below the 1 dB Compression
Point: -10 dBc Typ.
· Spurious Output Signal @ Any Signal Level up to the
Max Input Level: -80 dBc Max.
· Pulse Rise Time with Input Signals up to 20 dBm:
<5 ns
· Pulse Overshoot with Input Signals up to 20 dBm:
<0.5 dB
· Pulse Droop with the Following Pulses up to 250u in
Duration Input Signal up to -20 dBm: <2.0 dB
· Pulse Recovery Time with the Following Pulses up to
250u in Duration Input Signal up to -20 dBm: 15 ns
· Gain Switching Time: <500 ns
· DC Supply:
· +12 V ± 5% Max. Gain Position @ 780 mA Max.
· +12 V ± 5% Min. Gain Position @ 610 mA Max. - Measured 424 mA
PMI Website Link,
https://www.pmi-rf.com/product-details/pec-40-25-0r518-20-12-sff-ttlvg
|
